XY-1A Soil Testing Drilling Machine Introduction

XY-1A drilling rig adds mud pump which is based on XY-1. It is a kind of hydraulic feeding, high speed, high speed torque belt and portability with pump.Construction drilling of the projects e.g. prospection, geotechnical investigation, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction

XY-1A  Soil Testing Drilling Machine Technical Data

XY-1A Soil Testing Drilling Machine Feature:

1, The oil pressure feeding mechanism can improve drilling efficiency and reduce the labor intensity.

2 ,The drilling rig is equipped with a ball mounted card blessing mechanism with six side active drill rods. The utility model can perform no stopping and falling rod. And it has the advantages of high work efficiency, convenient operation, safety and reliability.

3 ,Hole pressure gauge indicates pressure which can be easy to grasp the situation inside the hole.

4, Handle concentration, easy operation.

5, It is compact, small in size, light in weight, strong in decomposition and easy to remove .It can be used in plains and mountains.

Why Choose Nailiang Machinery Drilling Rig ?

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 3-7 days if the goods are in stock. or it is 7-10 days if the goods are not in stock

Q: Do you provide samples ? is it free or extra ?

A:Sorry, free sample is not available.

Q: What is your terms of payment ?A:T/T 30% in advance, then pay the 70% T/T before shipping.

Q:How to order?

A:We will recommend you the most suitable model according to information you offered.

After you send your detail requirement, we provide quotation to you.

Q:Can I expect a quality products?

A:All the production and processing are strictly according to international standard. At the same time, mature production technology ensuring the quality satisfy international request. We also welcome the third party inspection, such as BV, SGS and TUV.

How to install the oil cylinder of the drill tower,

1. When the connecting pin can not be pulled out when the rotary locking connecting rod is removed, jog repeatedly to rotate left and right. 2. Expand the track to fully expand the track width. 3. Connect the upper mast and the middle mast. Loosen the fixing pin between the upper mast and the middle mast (the folded upper mast and the middle mast must be fixed together with this pin during transportation), extend the upper mast and pulley frame to the same straight line position with the middle mast, and use bolts to reliably connect the upper mast and the middle mast. 4. Connect the lifting anchor frame to the transverse fixed beam of the pulley frame with the piston rod of the pressurizing oil cylinder with a sleeve lock rope. Operate the handle (see the operating function of the handle). Extend the piston rod of the pressurizing oil cylinder to pull up the pulley frame, so that the pulley frame support is close to the upper end face of the upper mast, and reliably connected with bolts; 5. Connect the middle mast and the lower mast, pull out the main winch wire rope to the length that is enough to lift the drill pipe, start the machine operating handle (see the handle operation function), and slowly erect the mast to the vertical state. When the lower end face of the middle mast and the upper end face of the lower mast just lean together, stop operating the mast control rod immediately, otherwise the machine parts will be damaged, and then use bolts to reliably connect the two masts. 6. Take down the lower mast support rod 7, connect the pressurizing oil cylinder and the power head, adjust the mast to the vertical, extend the pressurizing oil cylinder to the vicinity of the power head, repeatedly expand and adjust the position, and finally install the pin connecting the power head and the oil cylinder, and tighten the baffle bolt beside the pin.